REPORT:
McVCO Handbook 1999

Table of Contents

• Introduction
• Part I: McVCO Operation
  • Bench Check
  • Connection Notes
  • Field Operation
  • Setup Procedure
  • Calibration Check
  • Figure 2A. Part locations and DIP switch
  • Figure 2B. Pinouts and test points
• Part II: Technical Reference
  • Circuit Description
  • Figure 3A. Schematic I/O and DC Power
  • Figure 3B. Schematic Seismic-signal Amplifier
  • Figure 3C. Schematic ADC, Microcontroller and Sinewave Generator
  • Specifications
• Part III: Application Notes
  • Gain and Frequency Response
  • Using the Second Channel
  • McVCO Test Cycle
  • Monitoring Site Battery Voltage
  • Using the Switched Power Output
  • Three Component Connection

Return to:
[Report Menu] ...